Master remote controls have two versions of the operating commands: digital up to 6-step joysticks, or analogical and proportional step-less joysticks . Analogical manoeuvers cab be adjusted by the operator from the transmitter, independently for each manoeuvres. The receiver has an LCD display reporting system status ,providing greater safety and agility if anomalies are detected. It also has an RS-485 serial port which can be use to connect to PLC’s ,robots, variators or any peripheral equipment that requires information through the serial port. It incorporates a multi-frequency, synthesized radio system taht enables the operator to automatically change the working channel. These units accept several operation configurations depending on each application.
MASTER/SLAVE: Two transmitters control two receivers. PITCH & CATCH: Two transmitters control one receiver. DATA FEED BACK: Bi-directional equipment.
TECHNICAL DESCRIPTION
| Number of Commands |
DIGITAL: 12/20/28 + Start -Stop – Horn
DIGITAL/ANALOGICAL:14-4/22-8 + Start -Stop-Horn |
| Responding Time |
<=50 ms |
| Active Emergency Responding Time |
<50 ms
|
| Passive Emergency Responding Time |
1,900 ms
|
| Operating Range Distance |
200m /656 ft
|
TRANSMITTER
| Operating Range Frequency |
UHF (865.000-867.000 MHZ)
Other frequencies available.
UHF (865.00 to 867.00 MHZ)
|
| Channel Spacing |
25 KHz |
| Modulation |
FM
|
| RF Power Output |
10mW A.R.P
|
| Coding Key |
FFSK
|
| Transmitting Power Consumption |
80mA
|
| Standby Power Consumption |
<800 µA
|
| Operating Working time(20°C/68°F) |
11 Hours + 30 Minutes after low – battery led flashes.
|
| Battery Capacity and type |
Ni-MH Battery 7.2V ,1500 mAh
|
| Battery Weight |
200g /0.44 lb
|
| Casing Material
|
Polyamide 6-6 reinforced with 15% fiberglass.
|
| Transmitter Approx. Weight |
1.5 Kg/3.30 lb
|
| Indicator Leds |
Transmission Indicator and low-battery on separate leds.
|
| Operating Commands |
Two dual-axis fully proportional and analogical step-less joysticks or digital upto 6 steps (combinations available)
|
| Protection Rating |
Ip65
|
RECEIVER
| RF Sensitivity |
03 µV at 12 dB S/N |
| Outputs
|
DIGITAL: by relays 5 A 30 Vdc/5 A, 250 Vac with resistive load (Cos =1) Comm. Port Rs-485 ANALOGICAL: by tension:bipolar (0-5 Ø V, 5 V, 0-10 V, 10 V)and unipolar (2/4/6V, 3/6/9 V, 6/12/18 V), ±± other values adjustable from the transmitter by the operator |
| Power Requirements |
48VAC/110VAC/230VAC (available 24 Vdc/12 Vdc)
|
| Display |
LCD display matrix 2 x 16 reporting system status
|
| Consumption 16 relays |
0.14 A at 230Vac/0.29 A at 110 Vac/0.7 A at 48 Vac
|
| 32 relays
|
0.18 A at 230Vac/0.35 A at 110 Vac/0.9 A at 48 Vac
|
| Casing Material |
Polyamide 6-6 reinforced with 30% fiberglass.
|
| Dimensions 16 relays |
255 x 200 x 95 mm/10.04 x 7.87 x 3.74 in
|
| 32 relays
|
315 x 235 x 120 mm/12.40 x 9.25 x 4.72 in
|
| Weight |
2.8 Kg (6×17 lb) (16 relays) / 4.2 kg (9.48 lb) (32 relays)
|
| Protection rating
|
Ip65 |
| Ambient Temperature
|
-20 C to 70°C |
BATTERY CHARGER
| Power requirements |
230 Vac (Optional 110 Vac) |
| Dimensions |
73 x 69 x 72 mm/2.87 x 2.71 x 2.83 in
|
| Battery Charging time |
4-6 hours
|
| Temperature |
0°C to 40°C /32° F to 104° F
|
| Weight |
200g/0.44 lb
|
022 28502162
